Contact Us

Questions, comments, concerns?  Email us, or call us today at 1.800.513.8992

         

123 Street Avenue, City Town, 99999

(123) 555-6789

email@address.com

 

You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

INSTALLATION

Installing GripAll products

The key to any installation is surface preparation. Surface preparation and application largely dictates GripAll products’ life span and performance. Follow these instructions to ensure your product will last! Also follow the tips and  tricks that apply to the surface you are adhering GripAll products to. Have any questions, or need our assistance? Feel free to call us, toll free at 1-800-513-8992.

STEP 1:      Clean surface with appropriate cleaner or solvent and let it dry fully.    *Apply product in temperatures above 50 degrees Fahrenheit/10 degrees Celsius.    *  Use appropriate degreaser/cleaner to keep material and surrounding surfaces free of debris and grease.     *In this application, a torch was used to help remove excess moisture from dam p concrete.

STEP 1:  

Clean surface with appropriate cleaner or solvent and let it dry fully.

*Apply product in temperatures above 50 degrees Fahrenheit/10 degrees Celsius.

*Use appropriate degreaser/cleaner to keep material and surrounding surfaces free of debris and grease. 

*In this application, a torch was used to help remove excess moisture from damp concrete.

Step 2:     Prepare surface for installing GripAll products, depending on the surface, a sealant is suggested for longevity.     *All surfaces are different, tips & tricks will have suggestions for the surface preparation.  Not sure? ask us.     *For un-sealed or damp concrete, we suggest a sheet membrane adhesive, as a surface primer, such as Carlisle CCW-715.

Step 2: 

Prepare surface for installing GripAll products, depending on the surface, a sealant is suggested for longevity. 

*All surfaces are different, tips & tricks will have suggestions for the surface preparation.  Not sure? ask us. 

*For un-sealed or damp concrete, we suggest a sheet membrane adhesive, as a surface primer, such as Carlisle CCW-715.

Step 3:    Peel away backing on one end, pressing the exposed adhesive down to the surface firmly, continue to peel away backing. Apply pressure by hand, or with a roller. Work down length of the product, smoothing out any air bubbles  and ensuring product edges are firmly secured.     *GripAll products can be easily cut to desired size with shears or a utility knife, measure surface before applying product.  

Step 3:

Peel away backing on one end, pressing the exposed adhesive down to the surface firmly, continue to peel away backing. Apply pressure by hand, or with a roller. Work down length of the product, smoothing out any air bubbles  and ensuring product edges are firmly secured. 

*GripAll products can be easily cut to desired size with shears or a utility knife, measure surface before applying product.  

    Periodically inspect product application to maintain product effectiveness.    

 

Periodically inspect product application to maintain product effectiveness.

 


TIPS & TRICKS

Clean the surface of any oil, dust, rust, or grime. For best results use aerosol delivered solvents or degreasers (brake cleaner, engine degreaser or any other rapid evaporating degreaser). Do not use citrus based solvents, as they may leave behind a film.

    WOOD: clean surface, remove loose debris or re-paint.

 

WOOD: clean surface, remove loose debris or re-paint.

    CONCRETE:   clean with solvent, use a concrete sealer, paint, or primer if porous.  

 

CONCRETE: clean with solvent, use a concrete sealer, paint, or primer if porous.  

    METAL:   clean with solvent.

 

METAL: clean with solvent.

Cutting the corners to the product may prevent damage, or being kicked up. If you do not think the surface is a suitable surface for a peel and stick application, we suggest using button head self tapping screws to help secure the grip. If you're questioning the surface and would like to ask our specialist, please feel free to contact us with any questions.